ESCape32 60A ESC DIY kit 12A onboard adjustable BEC

This kit includes The new escape32 60A ESC board And everything needed, except solder! This kid is perfect for those individuals who like to do things themselves And get dirty. 

escape 32 Wi-Fi linker Is required for tuning! Sold separately in our store. If you don’t already have one! 

Keep in mind this does for the #Warranty so be mindful of your skills. 

The ESC Boasts The same 12 amp on board adjustable BEC up to 8.4V, TVS diode for protection and 1000uf captor.

Kit includes: 

1 - ESC 60A

2 - shrink tubes… black and clear

3 - 3.5mm motor bullets with 16 awg wire

3 - 4mm motor bullets

3 - 14 awg motor wire

3 - motor end banana plugs 

1 - XT60 connector (battery)

1 - XT30 connector (battery) 

2 - JST female plugs for servo/ winch! 

3 - round shrink tubes for motor plugs

these will do brush mode, You need to use the middle and left or right plug! Just click on brushed in the check box using The Wi-Fi Link sold separately