BKTT 1/10 fruitcake 60A ESC! Boasting an adjustable 12a BEC!

BKTT 1/10 fruitcake 60A escape32 ESC with the monster adjustable 12A BEC! no longer need an external BEC 

features: 

• onboard 1000uf @35V capacitor
• built in TVS diode to prevent back feeding and also over current protection.
• monster 12A adjustable BEC with tons of headroom for all those HV servos
• sensoring port for sensored startup/ operation 
• Telemetry pad for those who want to add it
• 14 awg motor/ battery leads
• voltage read out
• 18th - 10th scale compatible
• ESCape32 Rev.13 Firmware (ESCAPE4)
• 60amp Continuous - 80amp Peak
• 2-4s capable (5s & 6S w/cap)
• 12amp Adjustable Built-in BEC 5.5, 6.5, 7.4, & 8.4v
• XT60 or XT30
• 4mm Motor Plugs, and 3.5mm motor plugs
• 14g silicone wire - Motor & Battery leads
• Direct power servo connection w/2 JST plugs
• Overall ESC Dimensions: (L) 40mm x (W) 24mm 

these do not come waterproof…. Can waterproof upon request 

These can run brushed mode! Once the brushed box is selected the unused settings will be grayed out. Make sure duty ramp is 0.  Picture is above for motor plug orientation. also you will need the middle wire for the RED lead. 

we offer a one year warranty against manufacturing Defects. You must return the damage one to us for inspection before a replacement Or refund is given. It has to be sent to us in the original way it was sent to you, which means no changes to the hardware whatsoever. We do not warranty the firmware as it is open source. These do not come waterproof.